24
1.3 Remote Control
TV Control
● STANDBY[Blue]: Allows switching between the ON
and STANDBY modes (TV).
● AV/TV: Allows to select the Input (TV)
● VOL + / VOL-: Allows raising / lowering the volume
level on TV.
● SET: Learning function
DVBT2 Control
● STANDBY[Red]: Allows switching between the ON and
STANDBY modes (DVBT2).
● REV / FWD: During playback allows rewinding / fast
forwarding.
● PREV / NEXT: During playback allows switching to the
previous / next video.
● PLAY: Allows start / restart of video file playback.
● PAUSE (TimeShift): To stop playing a video file. It
allows activating, if enabled, the TimeShift function
(currently not supported).
● STOP: Stops playback.
● REC: Allows to start recording the displayed channel
(currently not supported).
● COLORED BUTTONS: Depending on the menu, the
specific function is displayed in the legend at the
bottom of the screen.
● RED(USB): Push for open the USB memory stick.
● YELLOW(TTX): Teletext is displayed, if supported by
the current channel. Press EXIT to exit.
● EPG (Electronic Program Guide): The program guide
is displayed.
● INFO: Displays information about the current channel.
● CH + / CH-: Allows navigation in a menu or change
channels (next / previous).
● OK: Allows you to confirm a choice or show the
channel list.
● VOL + / VOL-: Allows navigation in a menu or raising / lowering the volume level.
● MENU: Switch to menu display.
● EXIT: To exit the current menu or return to the previous one.
● AUDIO: Allows the selection of the audio stream in DVBT mode (i
f available) while
during video playback from USB it allows you to choose the channel (right, left or
stereo).
To Next Page
Loading...
