27
First installation
Once all the connections have been made it is possible to turn on the TV and then the
device via the supplied remote control. The display will show the writing ON.
In this menu you can:
● [OSD Language] press the Vol-/Vol+ buttons to select the language used by the
device.
● [Country] press the Vol-/Vol+ keys to select the country where the device will be
used. This choice is critical because for a correct reception of the channels.
● [FTA Only] press the Vol-/Vol+ keys to select ALL (for Free and encrypted
channels) or FTA just for free channels.
To Next Page
Loading...
