28
● [Search Mode] press the Vol-/Vol+ keys to select DVB-T2.
● [Antenna Power] select the option On/Off to supply/don’t supply the signal on the
antenna output.
Use the arrows CH+/CH- to move to Channel Search and click the OK button.
Automatic channel tuning will start immediately. This process is completely automatic
but can last several minutes. After tuning, you can watch TV.
In the lower part, in menu mode, there is a legend with the active
keys on the displayed page.
● Use the [arrows Vol-/Vol+ and CH+/CH- to move through
the menus and change their settings.
● Tap on thebutton OK to confirm the selection.
● Tap Exit to exit.
ntenna Power:
● Set to ON when having an active antenna without power adapter.
● Set to OFF when having passive antenna or active antenna with
power adapter.
Playback
Once USB memeory with data is connected, press the button USB to view the files.
Select the file from the video to play and touch OK. Press Stop to stop playback.
The EPG function allows information on channel programming
up to a maximum of 7 days. This information depends on the
individual channel.
● Some devices may be not compatible. When lar
e capacity
memories are connected, the device may take some time to
analyze the entire contents.
● The use of slow memories / non-USB2.0 interface can
produce problems during playback.
● The device supports the following file systems: FAT32,
NTFS.
To Next Page
Loading...
