Kora Explorer 150SB - Technical Specifications and Warranty; Product Specifications; Warranty Information

Pa
g
e 6
-
g
uarantee
Technical specifications
EXPLORER 150SB
Integrated hybrid amplifier
Mains 230V/50Hz (115V-USA)
Consumption 500 watts max.
Fuse 3A
Power 2 x 100w @ 8 ohms
2 x 150w @ 4 ohms
Frequency band 0,2Hz @ 200Khz
Slew rate <1µ microseconds
Inputs 330mV/1 M ohms (10Vcc max)
Signal/noise 112dB
Dimensions 460 x 370 x 200mm
Weight 13kg
Kora E.C. warrants to the original purchaser that this product shall be
free from defects in material or workmanship for two (2) years from
date of original purchase. Tubes : 90 days.
Correct maintenance, repair and use are important to obtain
performance from this product. Therefore, carefully read the User's
Manual. This warranty does not apply to any defect that Kora E.C.,
in its sole discretion determines is due to :
1) Improper maintenance or repair, including installation of parts
and accessories that do not conform to the quality and the
specifications of the original parts.
2) Misuse, abuse, neglect or improper installation.
3) Accidental or incidental damage.
During the warranty period, an authorized service facility will provide
free of charge both parts and labor necessary to correct defects in
material or workmanship. To obtain such warranty service, the original
p
urchaser must include a dated proof of purchase from the dealer when
returning the product, pre-paid, to the service center. Please contact
your dealer for details.
All repairs performed after the warranty period has expired will be
billed to the owner and will carry a 90 day warranty on parts and
labor.