Need help?Do you have a question about the Korenix JetNet 4510 Series and is the answer not in the manual?
General| Series | JetNet 4510 |
|---|---|
| Type | Industrial Ethernet Switch |
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Humidity | 5% to 95% (non-condensing) |
| Mounting | DIN-rail or wall mounting |
| Compliance | IEEE 802.3, 802.3u, 802.3x, 802.1D, 802.1Q, 802.1p, 802.1w, 802.1s |
| Management | SNMP |
| Certifications | CE, FCC, UL |
Provides an overview of the Korenix JetNet 4510 series industrial managed Ethernet switches.
Lists the key features and capabilities of the JetNet 4510 series.
Introduces the hardware components and specifications of the JetNet 4510.
Instructions for connecting the DC power inputs to the JetNet 4510.
Connects digital inputs and outputs for monitoring and fault signaling.
Connects Ethernet and SFP combo ports, and earth ground.
Details DIN-Rail and wall-mounting installation procedures for the switch.
Details how to prepare and connect for serial console management.
Guides on setting up the switch for web-based management.
Instructions for establishing a Telnet connection for command-line management.
Introduces the Command Line Interface (CLI) and its modes of operation.
Covers system name, IP address, and admin password configuration.
Explains configuring port settings such as speed, duplex, and flow control.
Details network redundancy protocols like STP, RSTP, and Multiple Super Ring.
Explains Virtual LAN (VLAN) configuration, including 802.1Q and QinQ.
Describes the configuration and use of Private VLANs for port isolation.
Covers Quality of Service (QoS) for traffic prioritization using CoS and DSCP.
Explains IGMP Snooping for managing multicast traffic.
Details the configuration of Simple Network Management Protocol (SNMP).
Covers Port Security, IP Security, and IEEE 802.1x authentication.
Explains configuring warning features like Fault Relay and Event Selection.
Details tools for monitoring switch status and diagnosing problems.
Instructions on saving the current configuration to the switch's flash memory.
Lists the technical specifications and standards for the JetNet 4510.
Provides the pinout details for the RS-232 console cable.
Lists the compatible Korenix SFP transceiver models.
Explains Korenix's Private MIB for SNMP management.
To Next Page
