Korg C-520 - Adjusting the Metronome Level; Adjusting the Drum Patterns Reverb

The metronome > Adjusting the metronome level
24
Adjusting the metronome level
You can adjust the metronome’s level, in relation to the overall
instrument’s volume.
1. Press the TEMPO/MET.SET buttons together. The first
Metronome page should appear.
2. Press the SCROLL 

button to go to the second Metro-
nome page, Metro Lev/Rev. The Lv (Level) parameter will
be selected:
3. Use the +/YES and -/NO buttons to change the metro-
nome’s volume.
4. Press the EXIT button to return to the Main page.
Adjusting the drum pattern’s reverb
You can add a reverb effect to the drum patterns.
Note: Reverb does not apply to the metronome click (i.e., when
an ordinary time signatures is chosen).
1. Press the TEMPO/MET.SET buttons together.
2. If you are not there, use the SCROLL 

/ 

buttons to se-
lect the Rv (Reverb) parameter:
3. Use the +/YES and -/NO buttons to change the metro-
nome’s reverb.
4. Press the EXIT button to return to the Main page.
Metro Lev/Rev 2


Lv:100 Rv:64
Metro Lev/Rev 2
Lv:100 

Rv:64