To Next Page
G
Gary RomeroSep 10, 2025
Why doesn't my Korg Musical Instrument play the specified drum sound?
- JJennifer CollinsSep 10, 2025
Ensure that the Global mode P1 Key Transpose setting is at +00 and that the Octave is set to 8'.
Why doesn't my Korg Musical Instrument play the specified drum sound?
Ensure that the Global mode P1 Key Transpose setting is at +00 and that the Octave is set to 8'.
How to control Korg Musical Instrument via MIDI?
Check if the MIDI cables are connected correctly. Ensure that the settings are configured so that the MIDI data is being received on the same channel on which the transmitting device is sending it. Verify that the Global mode P2 Filter setting is checked.
How to turn on Korg Musical Instrument if power does not come on?
Make sure the power cable is connected to an AC outlet.
What to do if nothing appears on the LCD of my Korg Musical Instrument?
Verify that the rear panel CONTRAST knob is adjusted.
Why does the sound not stop on my Korg Musical Instrument?
Check if the Program Edit mode P1 Hold setting is un-checked. Also, verify if the Global mode P1 Sustain Pedal Polarity setting is correct. For an oscillator whose amp EG Sustain Level is set above 0, check if the Delay Time is set to other than Key Off in Program Edit mode P1–2.
Why can’t I write programs or combinations on my Korg Musical Instrument?
Ensure that the Global mode P2 Protect setting is un-checked.
Why does the selected song not playback on my Korg Musical Instrument?
Verify that the song contains playback data. Ensure that the Global mode P1 MIDI Clock setting is set to Internal. If using an external clock source, confirm MIDI Clock is set to External, and the external device is correctly transmitting MIDI Clock messages. Check that the Sequencer mode P2–2(3) Track Status settings are set to either INT or BOTH.
Why can’t I use MIDI Program Changes to select combinations on my Korg Musical Instrument?
Check if the Enable Combination Change setting is checked in Global mode P2 Filter.
Why do some keys produce sound while others do not on my Korg Musical Instrument?
Check if you are playing keys that produce no sound because of their Split settings (key- board assignments). Also, verify if the Global mode P1 Note Receive parameter is set to All.
What to do if I can’t load data from a floppy disk on my Korg Musical Instrument?
Verify that the floppy disk is inserted correctly and contains data. Also, check if the Global mode P2 Protect setting is un-checked for the type of data that you wish to load.
Details core features: ACCESS, MOSS, Touch View, expansion, programs, parameters, drum kits, controllers, sequencer, and effects.
Explains how to connect audio, pedals, and MIDI devices to the TRINITY.
Describes how keyboard, joystick, ribbon controller, and pedals control sound parameters.
Explains program organization and how to edit parameters for pitch, tone, and volume.
Covers MIDI connections, global settings, channels, and various MIDI message applications.
Lists common problems and their solutions for operating the TRINITY.
General| Multitimbrality | 16 parts |
|---|---|
| MIDI | In, Out, Thru |
| Oscillators | 2 per voice |
| Year Released | 1995 |
| Keyboard | 61 keys (Trinity, Trinity Plus, Trinity Pro), 76 keys (Trinity ProX) |
| Sequencer | 16-track sequencer |
| Storage | Floppy disk drive |
| Outputs | Stereo output, 4 individual outputs |
| Inputs | 2 audio inputs |
| Waveforms | PCM samples |
| Filter | Resonant low-pass, high-pass, band-pass |
| LFO | 2 LFOs per voice |
