Korg Trinity series User Manual

11. Selecting by category
26
11. Selecting by category
Program Play mode
Programs can be selected by category only when 1–1b: Program Number/Program Name is
selected.
1 Use the radio buttons to select the searching conditions.
When A is selected, only programs belonging to the category specified in A will be selected.
When B is selected, only programs belonging to the category specified in B will be selected.
When A and B is selected, programs belonging to both of the categories specified in A and B will
be selected.
When A or B is selected, programs belonging to either of the categories specified in A or B will be
selected.
2 Select categories A and/or B according to the selection of step 1.
3 Select the desired program from the programs that match the conditions.
4 If you wish to finalize your selection, press the OK button. If not, press the Cancel button.
Combination Play mode
Combinations can be selected by category only when 1–1b: Combination/Combination Name is
selected. Programs for each timbre can be selected by category only when 1–1c: Bank/Program is
selected.
1 Use the radio buttons to select the searching conditions.
When A is selected, only combinations belonging to the category specified in A will be selected.
When B is selected, only combinations belonging to the category specified in B will be selected.
When A and B is selected, combinations belonging to both of the categories specified in A and B
will be selected.
When A or B is selected, combinations belonging to either of the categories specified in A or B will
be selected.
2 Select categories A and/or B according to the selection of step 1.
3 Select the desired combination from the combinations that match the conditions.
4 If you wish to finalize your selection, press the OK button. If not, press the Cancel button.
Sequencer mode
Programs can be selected by category when the Program or Bank for each track is selected.
1 Use the radio buttons to select the searching conditions.
When A is selected, only programs belonging to the category specified in A will be selected.
When B is selected, only programs belonging to the category specified in B will be selected.
When A and B is selected, programs belonging to both of the categories specified in A and B will
be selected.
When A or B is selected, programs belonging to either of the categories specified in A or B will be
selected.
2 Select categories A and/or B according to the selection of step 1.
3 Select the desired program from the programs that match the conditions.
4 If you wish to finalize your selection, press the OK button. If not, press the Cancel button.

Korg Trinity series Specifications

General

Multitimbrality	16 parts
MIDI	In, Out, Thru
Oscillators	2 per voice
Year Released	1995
Keyboard	61 keys (Trinity, Trinity Plus, Trinity Pro), 76 keys (Trinity ProX)
Sequencer	16-track sequencer
Storage	Floppy disk drive
Outputs	Stereo output, 4 individual outputs
Inputs	2 audio inputs
Waveforms	PCM samples
Filter	Resonant low-pass, high-pass, band-pass
LFO	2 LFOs per voice