Korg Trinity series User Manual

2. Select and play a program
13
STEP 2
2. Select and play a program
The programs that are available on the TRINITY will depend on the model, and on whether the
Playback Sampler/flash ROM option and/or the MOSS-TRI option are installed ( ☞
page 9 in this
manual).
For the factory preset program names, refer to the separate
Voice Name List booklet.
There are three ways to select programs.
Selecting a program using the front panel switches
1 Press the [PROG] key.
You will enter Program Play mode.
2 Press the program name.
The display will invert.
3 Press the [BANK] key several times to select the bank.
4 Use the numeric keys to input the program number, and press the [ENTER] key.
Alternatively, you can use the VALUE controller to make your selection.
You can also use the
popup buttons to select programs . Programs can be selected by category
using Select By Category in the page menu ( ☞
page 26 in this manual).
4Select the program number
1Select the mode
2Select the bank
3Select the program edit cell
3

Korg Trinity series Specifications

General

Multitimbrality	16 parts
MIDI	In, Out, Thru
Oscillators	2 per voice
Year Released	1995
Keyboard	61 keys (Trinity, Trinity Plus, Trinity Pro), 76 keys (Trinity ProX)
Sequencer	16-track sequencer
Storage	Floppy disk drive
Outputs	Stereo output, 4 individual outputs
Inputs	2 audio inputs
Waveforms	PCM samples
Filter	Resonant low-pass, high-pass, band-pass
LFO	2 LFOs per voice