5. Setting a parameter
9
STEP 1
[BANK] key
Press this key to select the bank of the combination or program.
The banks that are available will depend on the model of TRINITY that you have, on whether the
Playback Sampler/Flash ROM option
is installed, and whether the
MOSS-TRI option
is
installed.
Keyboard input
You can use the keyboard to enter a note name or a velocity value.
Hold down the [ENTER] key and press the note that you want to specify, and the note or velocity
that you play will be input as the value.
When the P5 Drumkit page of Global mode is displayed, pressing a key on the keyboard will
recall the settings assigned to that key.
Pedal input
If in Global mode P1 you have set the function of the assignable foot pedal to
Data Entry
, the con-
nected foot pedal will operate in the same way as the VALUE slider, and you can use the pedal to
set parameter values.
Model Programs Combinations Remarks
TRINITY
Bank A (0…127)
Bank B (0…127)
Bank A (0…127)
Bank B (0…127)
standard specifications
Bank C (0…127)
Bank D (0…127)
Bank C (0…127)
Bank D (0…127)
added when the Playback Sampler/Flash
ROM option is installed
Bank M (0…127)*
0...63: added when the MOSS-TRI
option is installed
64...127: added when the MOSS-TRI
option + the Playback Sampler/
Flash ROM option are installed
TRINITY V3
TRINITY V3 pro
TRINITY V3 proX
Bank A (0…127)
Bank B (0…127)
Bank A (0…127)
Bank B (0…127)
standard specifications
Bank C (0…127)
Bank D (0…127)
Bank C (0…127)
Bank D (0…127)
added when the Playback Sampler/Flash
ROM option is installed
Bank M (0…127)*
0...63: standard specifications
64...127: added when the Playback Sam-
pler/Flash ROM option is
installed
To Next Page
Loading...
Need help?
General
