1. Listening to the demo songs
12
Play back the second demo song
Play back a song at a time
Here’s how to play back song 1. After song 1 is played back, song 2 will be ready for playback.
1
In the Sequencer mode page 1 display, press tab 7 button (Pref.).
The Preference tab page will appear.
7
Un-check the Continue box.
With this setting, pressing the [START/STOP] key will cause the first song to start, and playback
will stop before the second song begins. When you press the [START/STOP] key once again, the
second song will begin playing.
If this box is checked, when you press the [START/STOP] key, the first and second songs will be
played back consecutively.
8
Press the [START/STOP] key.
To stop playback during the song, press the
[START/STOP] key
once again.
When song 1 is finished, playback will stop automatically.
Stop demo song playback, and use the following
procedure.
1
In the Sequencer mode page 1 display, press Song.
2
Press the numeric key 1, and press the ENTER key.
The second song will be selected.
3
Press the [START/STOP] key on the front panel.
The second song will playback.
To stop demo playback during the song, press the
[START/STOP] key
once again.
2
Press Song.
The popup menu will appear.
3
Press numeric key 0, and press the [ENTER] key.
The first song will be selected.
You can also select this by pressing the first song
in the popup menu.
You can also select song 1 by using other VALUE
controllers (
☞
page 8 in this manual).
4
Press the song edit cell that appears under Next
Song.
5
Press numeric key 1, and press the [ENTER] key.
The second song will be selected.
6
Check the Chain To Song box.
The first and second songs will be connected.
1
2
4
6 7 1
To Next Page
Loading...
Need help?
General
