Need help?Do you have a question about the Korg Triton Studio and is the answer not in the manual?
General| MIDI | In, Out, Thru |
|---|---|
| Type | Workstation |
| Polyphony | 62 voices |
| Oscillators | 2 oscillators per voice |
| Effects | 2 master effects |
| Sequencer | 16-track |
| Sampling | 16-bit, 48 kHz, expandable RAM (optional EXB-SMPL board) |
| Display | TouchView graphical interface |
| Storage | Internal hard drive, floppy disk drive |
| Keyboard | 61, 76, or 88 keys with velocity and aftertouch |
| Sound ROM | 32 MB (expandable with EXB series) |
| Outputs | stereo main outputs |
| Inputs | L/Mono, R |
Select and play programs, manage MIDI data, and edit performance parameters.
Specify insert effect routing, select effects, and adjust chain settings for oscillator output buses.
Set master effects, chain order, and master EQ settings for overall sound shaping.
Set insert effect routing, select effects, and specify bus assignments for each timbre.
Record, play, and edit songs, manage track programs, and set song location parameters.
Edit recorded performance data, step record, and manage track events.
Record, edit, and assign patterns, manage RPPR function for realtime playback.
Set insert effect routing, select effects, and specify bus assignments for each track.
Set input source, adjust levels, specify sampling parameters, and manage memory status.
Edit sample data, delete unwanted portions, reverse waveforms, and adjust sampling frequency.
Specify loop points, set sample parameters, and edit waveform display.
Create and edit multisamples, assign samples to indexes, and adjust levels and pitches.
Apply insert effects to audio signals or samples, and set routing and send levels.
Apply insert effects to tracks, specify bus assignments, and adjust send levels.
Set master effects, chain order, and master EQ settings for song playback.
Set master tune, key transpose, effect global switch, and system clock settings.
Configure global MIDI settings, including channel, clock source, and filters.
Select insert effects, switch them on/off, make chain settings, and adjust parameters.
Select master effects, switch them on/off, make chain settings, and adjust parameters.
Adjust the three-band stereo EQ for overall tonal adjustment of the output sound.
To Next Page
