Program
P0
P1 P2 P3 P4 P5 P7 P8 P9
1
1. Program mode
In this mode you can select and play programs.
All MIDI data in Program P0: Play is transmitted and
received on the Global MIDI Channel “MIDI Channel”
(Global P1: 1–1a).
0–1: Perf. Edit (Performance Edit)
0–1a: Bank, Program Select, Category, 10’s Hold,
Bank (Bank Select)
[INT-A...INT-F, G, g(1)...g(9), g(d), EXB-A...EXB-G]
This is the program bank display.
Use the BANK [INT-A]–[EXB-G] keys to select the bank.
Bank G will advance to the next G (or g) bank each time you
press the [INT-G] key, as shown.
G→g(1)→g(2)→g(3)→g(4)→g(5)→g(6)→g(7)→g(8)→g(9)→
g(d)→G
Bank INT-F can be selected if you have installed the
EXB-MOSS option. When installed, the 128 special
EXB-MOSS programs will be available.
The TRITON STUDIO provides rewritable banks INT-A–
INT-E and EXB-A–EXB-G, each containing 128 programs
(total 1,536). As non-rewritable program areas, it provides
banks G (basic programs for GM2), banks g(1)–g(9) (varia-
tion programs), and bank g(d) (drums). ☞A list of the fac-
tory-set programs is provided in the separate booklet
“VNL.”
* For banks with no variation sounds, the GM basic sounds
will be recalled. (An * will be added at the beginning of
the program name.)
Program Select
(INT-A...INT-F, EXB-A...EXB-G) 0...127,
(G, g(1)...g(9), g(d)) 1...128]
Here you can select a specific program. When this parameter
is selected, you can select programs using the [] []
keys, numeric keys [0]–[9], or [VALUE] dial.
When you press the popup button, the “Bank/Program
Select” menu will appear. This displays programs by bank,
and allows you to select a program.
You can receive MIDI program changes from a con-
nected external MIDI device, or use a foot switch to
select programs. (“Foot SW Assign” Global P2: 2–1a,
“Foot Switch Assign List” ☞p.251)
Bank/Program Select menu:
1 Press the popup button at the left of “Program Select” to
access the Bank/Program Select menu.
2 Press one of the tabs at left or right to select a specific
bank.
If you select the GM bank, the Variation button will be
enabled.
Each time you press the Variation button, the bank will
cycle in the order of G → g(1) → g(2) → ... → g(8) → g(9)
→ G.
3 Select a program from the list. You can press the list to
make a selection, or use the [] [] keys.
4 Press the OK button to execute, or press the Cancel but-
ton to cancel your selection.
Category [00...15]
Selects the program category.
All programs are classified into one of sixteen categories.
You can select the desired category, and then choose pro-
grams from that category. Press the popup button, and the
“Category/Program Select” menu will appear.
Category/Program Select menu:
1 Press the (category) popup button above “Program
Select” to access the Category/Program Select menu.
2 Press one of the tabs at left or right to select the desired
category.
3 Select a program from the list. You can press the list to
make a selection, or use the [] [] keys.
4 Press the OK button to execute, or press the Cancel but-
ton to cancel your selection.
The category setting of each program can be specified in the
“Write Program” (0–1A) dialog box.
Program P0: Play
INT-A...INT-D for preloaded programs
INT-E User programs, such as programs that use multi-
samples created in Sampling mode.
INT-F for EXB-MOSS programs
G GM2 basic program
g(1)–g(9) GM2 variation programs*
g(d) GM2 drums program
EXB-A...EXB-G for user programs, and EXB-PCM series programs
0–1
0–1a
0–1b
0–1c
To Next Page
Loading...
Need help?
General
