Korg Trinity series User Manual

2. Program Edit mode
35
STEP 3
About program parameters
Some parameters of a program determine the type of change or effect that will occur in the sound
(such as EG and LFO, etc.), and other parameters determine the depth of this change or effect.
Even if you edit the parameters that determine the type of change or effect, this will make abso-
lutely no difference in the sound if the parameters that determine the depth (Intensity) of the
change or effect are set at 0.
Similarly, you will not get the results you intend unless you are aware of the parameter for which
you are adjusting the depth of effect.
On the TRINITY series, the parameters that determine the type of effect are in different pages
than the parameters that determine the depth of the effect.
The following three pages contain parameters that determine the depth of the effect.
• Page 2 tab 1 (3) “OSC 1 (2) P. Mod”
• Page 3 tab 2 (4) “Filter 1 (2) Mod”
• Page 5 tab 1 (3) “Amp 1 (2) Mod”

Korg Trinity series Specifications

General

Multitimbrality	16 parts
MIDI	In, Out, Thru
Oscillators	2 per voice
Year Released	1995
Keyboard	61 keys (Trinity, Trinity Plus, Trinity Pro), 76 keys (Trinity ProX)
Sequencer	16-track sequencer
Storage	Floppy disk drive
Outputs	Stereo output, 4 individual outputs
Inputs	2 audio inputs
Waveforms	PCM samples
Filter	Resonant low-pass, high-pass, band-pass
LFO	2 LFOs per voice