Korg Trinity series - Playback a GM Score (GM Music Data)

11. When you want to…
74
Playback a GM Score (GM music data)
The TRINITY is not GM compatible, but can playback a GM score if you load the appropriate
sound data and sequencer reset data from the included floppy disk.
From the included floppy disk, load GENERAL.PCG and GENERAL.SNG. Since the two files
have the same filename, checking the check box in the loading display will cause them to be
loaded together.
When this data is loaded, program bank A will contain sounds in the same arrangement as GM,
program bank B will contain the same drum sounds as GM, the global settings will be initialized
appropriately for GM, and sequencer song0 will be initialized for GM. This completes the prepa-
rations.
There are two ways to playback a GM score. One way is to load a GM score that was saved as SMF
data into the TRINITY and play it back using the internal sequencer. The other way is to use an
external sequencer to play back the GM data for performance on the TRINITY. In either case, use
song0 of Sequencer mode.
Each time a song finishes playing back, press the [RESET] key to initialize the settings of each
track.