10
SELECT START ........................................................................ [1...64]
Specifies the starting number of the range of pattern sets that
you want to export.
SELECT END ........................................................................... [1...64]
Specifies the ending number of the range of pattern sets that you
want to export.
SELECT TYPE .............................. [Ableton Live Set, WAV File Only]
Selects the file format that is exported. (→ see “EXPORT AU-
DIO”)
EXPORT CHAIN AUDIO
Using this function, you can export individual audio files for each pattern
contained in the song or pattern sequence created using the CHAIN TO
and CHAIN REPEAT parameters, beginning with the currently selected
pattern. The files are exported to the memory card in the KORG/electribe
sampler/Chain_From_[pattern number] Project folder.
TIP When exporting, the playback of each pattern is exported only
once, regardless of the CHAIN REPEAT parameter setting.
TIP Even if the CHAIN TO parameter creates an unending play-
back loop, each pattern is exported only once. Example: When
repeating Patterns 1→2→1→2→1... Pattern 1 and Pattern 2 are
exported only once, as individual files each containing one
loop of playback.
SELECT TYPE .............................. [Ableton Live Set, WAV File Only]
Selects the file format that is exported. (→ see “EXPORT AU-
DIO”)
IMPORT SAMPLE
From the memory card, this function imports a WAV file or an .
e2sSample.all file that was exported by the EXPORT ALL SAMPLE
function.
TIP WAV files created by the electribe sampler’s EXPORT SAMPLE
function contain editing data such as time slice information. If
you use a waveform editing application to edit the sample, this
editing data is lost, and cannot be recovered even if you load it
by IMPORT SAMPLE.
EXPORT SAMPLE
This function exports the currently selected sample to the memory
card as a WAV file.
EXPORT ALL SAMPLE
This function exports all preset samples and user samples to the
memory card as the single file KORG/electribe sampler/Sample/
e2sSample.all. This exported file is automatically loaded the next
time that you turn on the power, restoring the state of all samples.
TIP If you execute EXPORT ALL SAMPLE after deleting samples,
the file is exported in a defragmented state. By loading this file
at startup, you can increase the available user sampling time.
TIP Only one e2sSample.all file can be saved in the folder. User
samples are not loaded if you delete the e2sSample.all file from
the specified folder, or if you use a different card on which an
e2sSample.all file is not saved.
CARD FORMAT
This function formats (initializes) the memory card and creates the
folders that are needed by the electribe sampler.
FACTORY RESET
Returns all settings of the electribe sampler to their factory-set state.
SOFTWARE UPDATE
Updates the system software of the electribe sampler. Obtain the
update file from the Korg website, use your computer to copy it to
the specified folder of a memory card, insert the memory card into
the electribe sampler, and then execute this function.
8. EVENT REC/PLAY
These functions let you record a performance that uses several
patterns, or a performance that includes knob or trigger pad opera-
tions during the performance.
TIP The EVENT REC/PLAY functions are available if the CLOCK
MODE is set to Internal.
EVENT RECORDER
When you record using the Event Recorder, the data is written to the
KORG\electribe sampler folder as a file named e_[number].e2sev.
TIP There can be a maximum of 100 files.
EVENT PLAYER
Open Player
Selects an e2ev file recorded by the Event Recorder.
Enter: Start Play: Press the Enter button to start playback.
To Next Page
Loading...
Need help?
General
