8
SELECT START ....................................................................... [1...64]
Specifies the starting number of the range of pattern sets that
you want to export.
SELECT END .......................................................................... [1...64]
Specifies the ending number of the range of pattern sets that you
want to export.
SELECT TYPE ............................. [Ableton Live Set, WAV File Only]
Selects the file format that is exported. (→see “EXPORT AU-
DIO”)
CARD FORMAT
This function formats (initializes) the memory card and creates the
folders that are needed by the electribe.
FACTORY RESET
Returns all settings of the electribe to their factory-set state.
SOFTWARE UPDATE
Updates the system software of the electribe. Obtain the update file
from the Korg website, use your computer to copy it to the specified
folder of a memory card, insert the memory card into the electribe,
and then execute this function.
7. EVENT REC/PLAY
These functions let you record a performance that uses several
patterns, or a performance that includes knob or trigger pad opera-
tions during the performance.
TIP: The EVENT REC/PLAY functions are available if the CLOCK
MODE is set to Internal.
EVENT RECORDER
When you record using the Event Recorder, the data is written to the
KORG\electribe folder as a file named e_[number].e2ev.
TIP: There can be a maximum of 100 files.
EVENT PLAYER
Open Player
Selects an e2ev file recorded by the Event Recorder.
Enter: Start Play: Press the Enter button to start playback.
To Next Page
Loading...
