Korg EX-8000 Owner's Manual

MIDI IMPLEMENTATION
!Z’ ALL PROGRAM SAVE
1. Set WRITE Switch to ENABLE.
2. Set value of parameter 78 to 4.
WRITE
3. Push WRITE key q Program number flashes. m
m
-Flashing
4. Specify Program number 11 with number keys, ---
Transmitted
If the data has successfully loaded into the internal memory the display will give
a “Good” message. If it has not successfully loaded, an “Err” message ap-
pears. In the case, push the WRITE Key and repeat steps 3-5.
WRITE
5. Push WRITE key
Display returns to normal.
f
6. Return WRITE Switch to DISABLE.
r----
____ --------- ----
------------------1
\ NOTE:
;
1 When this operation is completed, set value of parameter 78 back to “0”. This disables
1 WRITE function. When power is turned ON, this parameter is reset at “0”.
1
I
L-------------------------- ---- -----_- ________ J

Korg EX-8000 Specifications

General

Brand	Korg
Model	EX-8000
Category	Control Unit
Language	English