q
How to Transfer data to another EX-8000,
DW-8000, etc.
Sound data is transferred from EX-8000 to DW-8000 or
another EX-8000.
(For details on Transmitted/Received System Exclusive
Messages see page 62.)
(Receiving Sound Data) (Containing desired program)
m SINGLE PROGRAM SAVE
1. Set WRITE Switch to ENABLE.
I
2. Set value of parameter 78 to 3.
3. Specify Program number of data to be transferred with number keys.
I
WRITE
4. Push WRITE key
Program number flashes.
I
Flashing
5. Specify Program number of program into which data is to be transmitted (other
equipment) with EX-8000 number keys.
-
Transmitted
If the data has successfully loaded into the internal memory the display will give
a “Good” message.
If it has not successfully loaded, an “Err” message will ap-
pear. In this case, push the WRITE key and repeat steps 3-5.
I
WRITE
6. Push WRITE key
Display returns to normal.
I
7.
To
Transmit other sound data, repeat steps 3-6.
8. Return WRITE Switch to DISABLE.
59-
To Next Page
Loading...
