Hard disk expansion for Korg iS40-iS50 keyboards
_________________________________________________________________________________
_
If a empty display appears after switching the keyboard on, please check the 14 pin blue and the
14 pin brown cable leading to the Host Adapter Board.
If the Floppy Disk Drive does not work after installation, check the red-black-black-yellow power
cable leading from the Host Adapter Board to the Floppy Disk Drive.
If the message "HARDDISK: ERR
" occours, please switch the instrument off and check the
installation. This message means that the media does not work because the operating System
has no detected the Hard Disk. Check the 40 pin ribbon cable connection of the Hard Disk.
If the partition to be formatted contains data, the message "DISK: CONTAINS XY FILES" will
appear on the display. Check the data of this hard disk partition and decide whether you want to
delete it or not.
Format operation: press the DISK key and use the CURSOR > key to select the UTILITY page,
press YES, select FORMAT option and press YES again. While pressing DISK (or Trk.Select) key
select the desired partition (C,D,E,F,G,....) using UP/DOWN (or the dial in iS40) keys, then press
the YES/ENTER to confirm format operation.
Page 5
To Previous Page
Loading...
Need help?
General
