Korg PA80 Connecting Manual

Connections and settings via USB to Host
1. In case you will connect the computer and the Pa800 via the USB port, install the Korg
USB MIDI Driver, as explained in the User's Manual of your instrument.
2. Connect the Pa800 and the computer either via the USB Device port, or via the MIDI ports
and a MIDI interface, as shown in the following diagram.
5. Go to “MIDI Setup” . Select the External Sequencer Setup.
PA3X, PA2X
PA3X musikant,
PA800, PA500
Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Sequencer Setup” page. Select the “Extern.Seq.” MIDI
Setup.
PA900, PA600 Select the “Extern.Seq.” MIDI Preset. You can do this by going to the
“MIDI: General Controls” page of the Global mode.
PA1X Press SEQUENCER to go to the Sequencer mode. Go to the
“Preferences: Global Setup” page. Select the “Extern.Seq.” MIDI
Setup.
Note!
External Sequencer - this setting is for programming a Song on an external sequencer
(MidiWorks PA+).

Korg PA80 Specifications

General

Polyphony	62 voices
ROM	32 MB
MIDI	In, Out, Thru
Inputs	Mic/Line input
Keyboard	61 keys
Effects	4 stereo digital multi-effect systems
Sequencer	16-track sequencer
Display	Backlit LCD
Storage	3.5" HD floppy disk drive
Sound Engine	HI Synthesis (Hyper Integrated)
Styles	Over 300 Styles preloaded in Solid State Disk
Outputs	L/Mono, R, Headphones
Connections	MIDI
Power Supply	AC power supply