Korg PS-3300 User Manual

HORG POLYPHONIC SYNTHESIZER psu. a3
SKONAL
GENERATORS
SIGNAL
MODIRERS
80 WOME BALANCE
JENVELOPE MOOIRIERS
ATTACK: Te
JDYNAMC LP FRERS|
(CUT OFF Frequency
To
MORG POLYPHONIC SYNTHESIZER cu sa | KORG POLYPHONIC SYNTHESIZER
SIGNAL GENERATORS —_JDYHAMIC LP FETERS|
wave Fon cu OFF FRtquenct
Ca Ee
[ENVELOPE MODIFIERS} SIGNAL MODIFIERS r Sac SmTEN C41 youn
x
tm
|
K8O
YOUMe
BALANCE
;
GENERAL
ENVELOPE GENERATOR| © rwacrsson t
PHONIC @POLYPHONIC SYNTHESIZER _
jPS-3300
HUI HSS = OWNER’S MANUAL
psu-sa0e

Korg PS-3300 Specifications

General

Brand	Korg
Model	PS-3300
Category	Synthesizer
Language	English

Summary

SIGNAL GENERATORS (SG)

WAVEFORM SELECTOR

Selects the basic waveform to determine the tone color.

FINE TUNING (±100 cents)

Fine-tunes the pitch of the sound.

TEMPERAMENT ADJUST

12 knobs for independent tuning adjustment.

VCO (Voltage Controlled Oscillator)

DYNAMIC LOW-PASS FILTERS (DLPF)

CUT-OFF FREQUENCY (Fc)

Adjusts the cutoff frequency of the low-pass filter.

PEAK ADJUSTMENT

Emphasizes resonance at the cutoff point.

KEYBOARD FILTER BAL- ANCE

EXPAND

Controls how EM envelope affects the filter cutoff.

VCF (Voltage Controlled Filter)

ENVELOPE MODIFIERS (EM)

DECAY TIME

SUSTAIN LEVEL

RELEASE SWITCH (R-SW)

ENVELOPE GENERATOR (GEG)

RESONATORS (RESO)

RESONATOR SENSITIVITY ADJUSTMENT

PEAK FREQUENCY ADJUSTMENT

Selects peak frequencies for resonances (Fo).

MODULATION GENERATOR 1 (MG-1)

FREQUENCY ADJUSTMENT (0.1Hz ~1kHz)

GENERAL ENVELOPE GENERATOR (GEG)

DELAY TIME

ATTACK TIME

RELEASE TIME

TRIGGER INPUT JACKS

SIGNAL MIXER (SM)

TOTAL VOLUME

60P CONNECTOR AND POWER SUPPLY

POWER SWITCH

Turns the power on and off for both units.

60P CONNECTOR

Connector for linking keyboards, sequencers, etc.

POWER CORD SOCKET

Connector for the power cord.

POLYPHONIC KEYBOARD PS-3010

KEYBOARD TRIGGER OUT

X-Y MANIPULATOR

Joystick for simultaneous control of two output voltages.

SOUND SYNTHESIS

Thinking about sound synthesis

Method for analyzing and synthesizing sounds.

First analyse the sound you want to synthesize

Signal flow

Vibrato (a frequently used effect)

Bend (a frequently used effect)

Understanding the patch

Important points when patching

Key points and precautions for setting up patches.

Patching procedure

A structured approach to creating patches.

Patching examples

Example 1. Delayed vibrato.

Demonstrates how to create a delayed vibrato effect.

PS-3300 and PS series

Specifications

Lists the technical specifications for the PS-3300 and its modules.

Caution

Power Supply Caution

Explains how to change the power supply voltage safely.

Caution when setting up a patch.

Cautions for setting up patches and signal levels.

Impedance of inputs and outputs used for modulation.

Details input and output impedance for modulation signals.

60P Connector caution

Cautions regarding the use of the 60P connector.

Trouble shooting

Guide for troubleshooting and checking for faults.