Need help?Do you have a question about the Korg prologue and is the answer not in the manual?
General| Type | Analog Synthesizer |
|---|---|
| Aftertouch | No |
| Display | OLED |
| Arpeggiator | Yes |
| Polyphony | 8 voices (prologue-8), 16 voices (prologue-16) |
| Oscillators | 2 VCOs + Multi Engine |
| VCO Waves | Sawtooth, Triangle, Square |
| Filter | 2-pole lowpass filter |
| LFO | Yes |
| Effects | Delay, Reverb |
| Keyboard | 49 keys (prologue-8), 61 keys (prologue-16) |
| User Oscillators | Yes |
| Connectivity | USB |
| MIDI | In, Out |
| Audio Outputs | L/Mono, R |
| Weight | 7.5 kg (prologue-8), 9.1 kg (prologue-16) |
Overview of the documentation included with the prologue synthesizer.
Highlights the main capabilities and unique aspects of the Korg prologue synthesizer.
Details the layout and functions of knobs, buttons, and switches on the prologue's front panel.
Explains the various input and output jacks on the rear of the prologue synthesizer.
Instructions for safely connecting the power cord to the prologue.
Describes the automatic power-saving feature and how to enable or disable it.
How to choose and perform with programs on the prologue synthesizer.
Guide to activating and configuring the prologue's built-in arpeggiator function.
Overview of how programs are structured, including sounds, effects, and voice settings.
Methods for editing existing programs or creating new sounds from scratch on the prologue.
Explanation of fundamental master controls like pitch bend, modulation wheel, and octave buttons.
Details the different voice modes available and how to adjust their parameters.
How to set and edit timbre parameters for layered or split sounds.
In-depth guide to configuring the two analog oscillators and the multi engine for sound generation.
Detailed explanation of the Voltage Controlled Filter (VCF) parameters like cutoff and resonance.
Configuration of the Envelope Generators (EG) for amplitude and filter, and the Low Frequency Oscillator (LFO).
How to use and configure modulation, delay, and reverb effects.
Steps to activate the dual-timbre mode for the prologue synthesizer.
Method for copying programs to the sub-timbre for sound layering.
Steps to access the detailed editing functions of the prologue synthesizer.
Detailed parameter editing for programs, including names, timbre, and modulation assignments.
Access to functions like initializing, copying, and dumping programs and system data.
Universal settings for the entire prologue, including MIDI, tuning, and display.
How to perform manual tuning to correct analog drift in the prologue.
Procedures for resetting the prologue to its original factory presets.
Accessing functions quickly by combining the SHIFT button with others.
How to synchronize the prologue with other devices using sync jacks.
Connecting and controlling the prologue with external MIDI equipment and computers.
A comprehensive list of available modulation, delay, and reverb effects and their sub-types.
A list of all factory and user programs, including names, categories, and authors.
To Next Page
