Korg prologue - Playing Programs; Selecting and Playing a Program

11
Playing Programs
Selecting and Playing a Program
The prologue has 500 program locations of which 250 are preloaded with factory
presets.Thepresetprogramsareassignedtotherst250 locations and are organized
into sound categories for easy selection. The remaining locations contain the initial-
ization program that can be used as a starting point when creating user programs.
1.
Enter the Play mode.
When the prologue is turned on, it will automatically enter the Play mode.
InthePlaymode,verifythattheEDITMODEbuononthefrontpanelareunlit.
2.
Turn the PROGRAM/VALUE knob to select a Program.
ThedisplaywillindicatetheProgramnameandnumber.Referto“Program
List”(p.72)fordetails.
TIP
In addition to showing Program name and number, the display can also
be used as an oscilloscope, to show the electrical signals created by the
waveform of the sound.
3.
Play the keyboard and use the controls on the front panel, such as the OC-
TAVE buons or the wheel.
TheOCTAVEbuons on the left can be used to transpose the
sound within a range of -2 to +2 octaves.
Move the pitch bend wheel up and down to change the pitch, and
move the modulation wheel up and down to change the assigned
parameters.
2
1
Make sure the button is unlit.