Korg prologue - Saving a Program

19
Saving a Program
We recommend that you save your Program on the prologue after editing the sound.
Anyeditsthatyoumaketothecurrentprogramwillbelostifyouturno
thepowerorrecalladierentprogrambeforesaving.
1.
Edit the program in Play mode.
Fordetails,referto“BasicParameterEditing”(p.20).
2.
Press the WRITE buon; the prologue will enter the Write standby mode, and
the WRITE buon will blink.
Themessage“Wheretowrite?”willappearinthedisplay.
3.
Turn the PROGRAM/VALUE knob to select the Program number where your
new sound will be saved.
TIP
PresstheEXITbuontocanceltheoperation.
4.
Press the WRITE buon once more.
TheProgramwillbesavedininternalmemory,andthemessage“Complete”
will appear in the display.
NeverturnothepowerwhileProgramsarebeingsaved.Doingsomay
destroy the internal data.