Korg prologue - Rear Panel Connections

7
Rear Panel Connections
The illustration below shows a typical example of connections for the prologue.
Connect your equipment according to the needs of your own system.
Besurethatthepoweronallofyourdevicesisturnedobeforeyoumake
connections. Leaving the power on when you make connections may cause
malfunctions, or damage your speaker system and other components.
1.
~ACV (AC power connector)
ConnecttheACpowercord(included)tothisjack.
2.
(Power switch)
Thisturnsthepoweron/o.
3.
(USB B connector)
ThisconnectorallowstheprologuetoexchangeMIDImessageswithyourcom-
puter.
4.
EXPRESSION jack
ConnectanoptionalXVP-20volume/expressionpedal(soldseparately)oran
XVP-10 expression pedal (sold separately) to control the assigned parameters.
5.
DAMPER jack
ConnectanoptionalDS-1Hdamperpedal(soldseparately)oraPS-1/PS-3pedal
switch(soldseparately)tocontrolthedampereect.
This instrument does not feature a half-damper function.
Computer
Sound module, rhythm machine, etc. MIDI keyboard, rhythm machine, etc.
Groove machine
Powered monitor
Headphones
MIDI cable
USB cable
MIDI OUT
MIDI IN
SYNC IN
USB
INPUT
INPUT
Expression Pedal
Damper Pedal, Pedal Switch, etc.
to AC outlet
Power cord
(included)
mini cable
6. MIDI IN/OUT connectors
7. SYNC IN/OUT jacks5. DAMPER jack
8. OUTPUT L/MONO, R jacks
1. ~ACV (AC Power connector)
4. EXPRESSION jack2. (Power switch)
3.
( USB B connector )
9. (Headphones jack)
prologue-16