Korg prologue - Creating Sounds

18
Creating Sounds
Editing a program means changing the Program’s parameters to alter its sound.
There are two way to create sounds on the prologue.
•
Select an existing Program that’s close to the sound you want, and edit that Pro-
gram’s parameters to achieve your own custom sound.
•
YoucanalsoinitializealltheProgramparameterstocreateyourownsoundfrom
scratch.
Editing an Existing Program
1.
In Program mode, select the Program that you want to use as a starting point.
2.
Use the knobs and switches on the front panel.
TakeamomenttoconsiderthedierencesbetweenthecurrentProgramandthe
sound you have in mind, and use the front panel controls to edit the necessary
parameters.
TIP
Fordetailsonhowthepitch,sound,andvolumechangewhenusingthe
knobsandswitches,referto“BasicParameterEditing”(p.20).
We recommend that you save the Program on the prologue after editing
thesound.Anyeditsthatyoumakewillbelostifyouturnothepower
orrecalladierentProgram.Fordetails,referto“SavingaProgram”
(p.19).