Korg prologue - Edit Mode; How to Enter the Edit Mode

43
Edit Mode
Althoughnearlyalloftheprologue’smainparameterscanbeeditedusingtheknobs
and switches on the panel, other detailed parameters are accessed using the Edit
mode.
There are three sub-modes within the Edit mode: PROGRAM EDIT mode, FUNC-
TION mode, and GLOBAL EDIT mode.
How to enter the Edit mode
1.
Press the EDIT MODE buon.
EachEditmodeisshowninthedisplay,andthebuonslight.
2.
Press the EDIT MODE button in succession; or use the PROGRAM/VALUE
knob to select PROGRAM EDIT mode, FUNCTION mode, or GLOBAL EDIT
mode.
PROGRAM EDIT mode: Use this mode to change the program name and as-
sign parameters to the modulation wheel or pedal, as well as to make other pro-
grameditingfunctionssuchastimbreseings.
FUNCTION mode: Use this mode to initialize or copy a program, perform a
MIDIdatadumpandsoon.
GLOBAL EDIT mode: Use this mode to set how the knobs and switches should
function,aswellasseingssuchasMIDIfortheentiresynthesizer.
2
1 , 2
3