Korg prologue - Page 44

44
3.
Press the PROGRAM SORT/EDIT PAGE buons 1–8.
The prologue will enter the respective Edit page, and the parameter names will
be indicated on the display.
Switchtoadierentpagebypressingthesamebuoninsuccession.
Fordetailsoneachparameter,referto“PROGRAMEDITmode”(p.45),
“FUNCTIONmode”(p.52)and“GLOBALEDITmode”(p.54).
4.
After you have congured the parameters in PROGRAM EDIT mode and/or
FUNCTION mode, press the WRITE buon to save your changes.
See “SavingaProgram”(p.19) for details.
GLOBALEDITmodeparametersareautomaticallysavedwhenyouswitchpag-
es, so there is no need to save them manually.
If you do not save your changes and select another Program after you
haveconguredtheparametersinthePROGRAMEDITmodeandthe
FUNCTION mode,yourseingswillbelost.