Korg prologue - FUNCTION Mode

52
FUNCTION mode
Button 1 Button 2 Button 7 Button 8
INITIALIZE PROGRAM FETCH DUMP ALL DUMP
Init Program Program Fetch Program Dump All Dump (USB)
Init Main Timbre All Dump (MIDI)
Init Sub Timbre
Button 1 (INITIALIZE)
ThisbuoninitializesthecurrentProgram.
TurnthePROGRAM/VALUEknobuntil“PressWRITE”isindicatedinthedisplay.
TheWRITEbuonwillblink.
PresstheWRITEbuontoinitializetheProgram.Thedisplaywillindicatethemessage
“Initialized”.
Init Program
This initializes the currently selected program.
Init Main Timbre
Initializes the main timbre of the currently selected program.
Init Sub Timbre
Initializes the sub-timbre of the currently selected program.
Button 2 (PROGRAM FETCH)
The program fetch function copies the sound of another program to the sub-timbre
of the currently selected program.
Referto“Programfetchfunction”(p.41) for details.