22
TIMBRE section
Setthetimbreoftheprologue-16intheTIMBREsection.
Thetimbreontheprologue-8canbeeditedinPROGRAMEDITmode(p.46,“But-
ton3(TIMBRE)”).
Themethodsofenablingsub-timbresandoperatingeachparameteraredierentfor
theprologue-16andtheprologue-8.Referto“Abouttimbre”(p.39) for details for
both instruments.
SUB ON/PGM FETCH button (prologue-16 only)
This enables the sub-timbre and allows you to use the program fetch function. See
“Programfetchfunction”(p.41) for details on the program fetch function.
Pressthisbuontoenablethesub-timbre,makingtheprologueplaywithtwotim-
bres(8voices+8voices).TheSUBON/PGMFETCHbuonlightsupatthistime.
Hold downthebuontoentertheprogramfetchfunctioninFUNCTIONmode.
TheSUBON/PGMFETCHbuonwillblink.
Toenablethesub-timbreontheprologue-8,use“SubTimbre”(p.46) in PRO-
GRAMEDITmode.Tousetheprogramfetchfunction,setusing“Buon2(PRO-
GRAMFETCH)”(p.52)inFUNCTIONmode.
MAIN/SUB BALANCE knob (prologue-16 only) [0...127]
Adjuststhevolumebalancebetweenthemaintimbreandthesub-timbre.
64: The volume for the main timbre and the sub-timbre will be the same.
Turning the knob to the left will increase the volume of the main timbre, and turn-
ing the knob to the right will increase the volume of the sub-timbre.
Ontheprologue-8,thisissetin“Main/SubBalance”(p.46)inPROGRAMEDIT
mode.
TYPE switch (prologue-16 only) [LAYER, XFADE, SPLIT]
Sets the performance type for the main timbre and the sub-timbre.
LAYER: The main timbre and sub-timbre will be layered together when playing.
XFADE: Asyoumoveupthekeyboard,thesubtimbrewillgraduallycrossfadeinto
the main timbre.
SPLIT:Themaintimbreandsub-timbrewillbesplitintodierentrangesofthekey-
board when playing.
Thisissetin“TimbreType”(p.46)inPROGRAMEDITmodeontheprologue-8.
TIP
Thepositionandsplitpointaresetin“Main/SubPosition”(p.46) and
“SplitPoint”(p.46)respectively,inPROGRAMEDITmode.