Korg prologue - Program Fetch Function

41
Program fetch function
Use the program fetch function to copy the sound of a program to the sub-timbre of
the currently selected program. This function is especially convenient for combining
sounds and hearing how they sound together.
prologue-16
1.
Hold down the SUB ON/PGM FETCH buon.
TheprologuewillenterthePROGRAMFETCHseingsinFUNCTIONmode,
and the current program will be shown in the display.
2.
Turn the PROGRAM/VALUE knob to display the main or sub-timbre of other
programs, and select the sound to copy.
Theword“PREV”willdisplaytotherightsideoftheprogramnumberinthe
display,sothatyoucanconrmthesound.
Themaintimbreisdisplayedas“M”atboomright,andthesub-timbreisdis-
playedas“S”atboomright.
Check the sounds by playing the keyboard.
Initialization programs cannot be selected.
TIP
Tocanceltheprogramfetchfunction,presstheEXITbuon.
3.
Press the WRITE buon.
The sound you selected will be copied to the sub-timbre of the program, and the
displaywillindicatethemessage“Complete”.
TIP
We recommend that you save the program after using the program fetch
function.Anyeditsthatyoumaketothecurrentprogramwillbelostif
youturnothepowerorrecalladierentprogrambeforesaving.See
“SavingaProgram”(p.19) for details.
prologue-8
1.
Press the EDIT MODE buon to enter FUNCTION mode.
2.
Press PROGRAM SORT/EDIT PAGE buon 2.
TheprologuewillenterthePROGRAMFETCHseings,andthecurrentpro-
gram will be shown in the display.