Korg prologue - Page 42

42
3.
Turn the PROGRAM/VALUE knob to display the main or sub-timbre of other
programs, and select the sound to copy.
Theword“PREV”willdisplaytotherightsideoftheprogramnumberinthe
display,sothatyoucanconrmthesound.
Themaintimbreisdisplayedas“M”atboomright,andthesub-timbreisdis-
playedas“S”atboomright.
Check the sounds by playing the keyboard.
Initialization programs cannot be selected.
TIP
Tocanceltheprogramfetchfunction,presstheEXITbuon.
4.
Press the WRITE buon.
The sound you selected will be copied to the sub-timbre of the program, and the
displaywillindicatethemessage“Complete”.
TIP
We recommend that you save the program after using the program fetch
function.Anyeditsthatyoumaketothecurrentprogramwillbelostif
youturnothepowerorrecalladierentprogrambeforesaving.See
“SavingaProgram”(p.19) for details.