Korg prologue - Auto Power Off Feature

10
1.
Lower the volume of your powered monitors or external output system, and
turn them o.
2.
Turn o the Power switch on the rear panel of the prologue.
 Onceyouhaveturnedtheprologueo,waitabout10secondsbeforeturn-
ing the prologue on again.
Auto Power O Feature
TheprologuefeaturesanAutoPowerOfeaturethatcanautomaticallyturnthe
prologueoafter4hourshaveelapsedwithnooperationoftheknobs,switches,
buons,orkeyboardoftheprologue.Bydefault,thefactoryseingfortheAuto
PowerOisenabled.TheAutoPowerOcanbedisabledusingthestepsbelow.
1.
Press the EDIT MODE buon.
The prologue will enter the Edit Mode, and the display will look like the illustra-
tion shown below.
2.
Turn the PROGRAM/VALUE knob, and select GLOBAL EDIT.
TIP
GLOBALEDITcanalsobeselectedbypressingtheEDITMODEbuon.
3.
Press buon 8 twice.
“AutoPowerO”willbedisplayed.
4.
Turn the PROGRAM/VALUE knob, and select “O”.
5.
Press the EXIT buon.
The prologue will enter the Play mode, and the display will indicate the current
Program.
TIP
SeingsinGLOBALEDITaresavedautomatically.
2, 4
531