26 – Using the SV-1 | Restoring settings to their default value
RESTORING SETTINGS TO THEIR DEFAULT VALUE
Each time you move a knob, the original value is changed. Press the same knob
to recall the default value for the corresponding parameter.
SWITCHING TO A DIFFERENT SOUND OR EFFECT
WHILE EDITING
When selecting a different effect in a section, all changes to the previous effect
are preserved. You can return to the edited effect, and all changes will still be
there. (In case you want to return to the default value, press the corresponding
parameter’s knob).
On the contrary, when you select a different sound or favorite, all parameters are
reset and changes are lost.
SV1-100-UserGuide-EFGI.book Page 26 Tuesday, June 30, 2009 9:23 AM
To Next Page
Loading...
