5–2: Track Name
115
5–2I: Insert Measure
This command inserts the specified number of measures into the track specified in the tab 2 dis-
play.
For details refer to “5–1I: Insert Measure.”
5–2J: Copy Measure
This command copies measures of the track specified in the tab 2 display.
For details refer to “5–1J: Copy Measure.”
5–2K: Move Measure
This command moves measures of the track specified in the tab 2 display.
For details refer to “5–1K: Move Measure.”
5–2L: Create Control Data
This command creates and inserts into the area specified in the tab 2 display control data that
changes smoothly until it reaches a specified value.
For details refer to “5–1L: Create Control Data.”
5–2M: Erase Control Data
This command erases control data from the area specified in the tab 2 display.
For details refer to “5–1M: Erase Control Data.”
5–2N: Quantize
This command quantizes (adjusts) the timing of musical data recorded in a track.
For details refer to “5–1N: Quantize.”
5–2O: Shift Note
This command shifts (moves) the range of data (of measures and pitches) specified in the tab 2 dis-
play by the specified amount.
For details refer to “5–1O: Shift Note.”
5–2P: Modify Velocity
This command modifies the velocity values over time for the area specified in the tab 2 display,
using the specified curve.
For details refer to “5–1P: Modify Velocity.”
To Next Page
