Korg Trinity pro - 3-3: Filter 2 A;B (Filter 2 A;Filter 2 B); 3-4: Filter 2 Mod (Filter 2 Modulation)

3–3: Filter 2 A/B (Filter 2A/Filter 2B)
32
3–3: Filter 2 A/B (Filter 2A/Filter 2B)
This page will be displayed if “1–1c: Oscillator Mode” is set to double.
Here you can make settings to specify how filters 2A and 2B are connected, and their basic set-
tings.
Refer to “3–1: Filter 1 A/B.”
3–4: Filter 2 Mod (Filter 2 Modulation)
This page will be displayed if “1–1c: Oscillator Mode” is set to double.
Here you can make settings to specify how modulation is applied to filter 2 (for oscillator 2) to
affect the sound.
Refer to “3–2: Filter 1 Mod.”