3–2: Velocity Zone
66
3–2d: Bottom Velocity [1…127]
Specifies the lowest velocity value at which each timbre 1–8 will sound.
The velocity can also be specified from the keyboard.
▼
Page Menu Command
3–2A: Write Combination
This command writes an edited combination into the specified combination number. Be sure to
write important combinations. If you turn the power off or select another combination before writ-
ing, it will not be possible to recover the edited data.
For details refer to Basic Guide page 23, “9. Writing a program or combination”.
Bottom
Slope
Bottom Velocity
Top
Slope
Top Velocity
Velocity
Volume
Volume change as affected by velocity
To Next Page
