Korg wavestate - SHIFT Button Functions; Accelerated Editing with ENTER; Mod Knobs Explained; Accessing Help Pages

Installation
4
e Device Manager appears.
4. Conrm that a new RNDIS device is present under “Other devices.”
5. Right click on the new RNDIS device and select “Update Driver.”
6. Click “Browse my computer for driver soware.”
7. Click “Let me pick from a list of available drivers on my computer.”
8. Select “Network Adapter” for the device type and click “Next.”
9. Select “Microso” for the Manufacturer and click “Next.”
10. Select “Remote NDIS Compatible Device” for the Model and click “Next.”
A pop-up window titled “Update Driver Warning” appears.
11. Click “Yes” to continue installing the driver.
Wait for the process to complete, and close the window when done.
NCM conguration: Windows 10
1. On the wavestate, press UTILITY twice and then make sure that the USB Network parameter is set to NCM.
For more information, see “USB Network” on page2. If you change the setting, restart the wavestate before
proceeding.
2. Plug in the USB cable from the wavestate.
3. Open the Device Manager.
ere are various ways to do this, but the easiest is from the Power User Menu:
• Press the WIN (Windows) key and the X key together.
• e Power User Menu appears.
• Select Device Manager from the menu.
e Device Manager appears.
4. Conrm that a new NCM device is present under the “Other devices” heading.
5. Right click on the new NCM device and select “Update driver.”
6. Click “Browse my computer for driver soware.”
7. Click “Let me pick from a list of available drivers on my computer.”
8. If necessary, select “Network Adapter” for the device type and click “Next.” Otherwise, skip to the next step.
9. Select “Microso” for the Manufacturer.
10. Select “UsbNcm” for the Model and click “Next.”
A warning may appear: “Installing this device is not recommended.” If so, press “Yes” to continue.
Wait for the process to complete, and close the window when done.