Korg wavestate - Getting Started; About the wavestate Manuals; Navigation Controls; Layer A;B;C;D

Installation
3
Windows
To install the soware on Windows:
1. Double click “Korg wavestate Editor/Librarian [version number] Installer.exe.”
e installer will start.
2. Follow the on screen instructions to complete the installation.
e installation will run. Two separate items are installed: Apple Inc.’s Bonjour, which allows the computer to
communicate with the wavestate through USB Networking (see below) and the Editor/Librarian application.
3. Aer the installation is complete, if you have not already congured the NCM or RNDIS driver, do so now.
e wavestate uses either NCM or Microso’s RNDIS to communicate with the computer. If you’ve had to update the
wavestate soware, you’ll already have done this conguration, and can simply launch the Editor/Librarian and get
going! Otherwise, follow the instructions below. Note that the process works slightly dierently for Windows 7, 8, and
10.
In some cases, the wavestate may not be immediately recognized aer installation. If this occurs, simply restart your
computer.
RNDIS conguration: Windows 7
Aer connecting the wavestate to a Windows 7 computer, there will be new entries in the Device Manager under
“Other Devices” and also under “Sound, video and game controllers.”
1. On the wavestate, make sure that the USB Network parameter is set to RNDIS.
For more information, see “USB Network” on page2. If you change the setting, restart the wavestate before
proceeding.
2. Plug in the USB cable from the wavestate.
3. Open the Start Menu, and select Control Panel.
e Control Panel opens.
4. Click on Hardware and Sound.
e Hardware and Sound window appears.
5. Under Devices and Printers, click on Device Manager.
e Device Manager appears.
6. Conrm that a new RNDIS device is present under “Other devices.”
7. Right click on the new RNDIS device and select “Update Driver Soware”.
8. Click “Browse my computer for driver soware.”
9. Click “Let me pick from a list of available drivers on my computer.”
10. Select “Network Adapter” for the device type and click “Next.”
11. Select “Microso Corporation” for the Manufacturer and click “Next.”
12. Select “Remote NDIS Compatible Device” for the Model and click “Next.”
A pop-up window titled “Update Driver Warning” appears.
13. Click “Yes” to continue installing the driver.
Wait for the process to complete, and close the window when done.
RNDIS conguration: Windows 8
Aer connecting the wavestate to a Windows 8 computer, there will be new entries in the Device Manager under
“Other Devices” and also under “Sound, video and game controllers.”
1. On the wavestate, make sure that the USB Network parameter is set to RNDIS.
For more information, see “USB Network” on page2. If you change the setting, restart the wavestate before
proceeding.
2. Plug in the USB cable from the wavestate.
3. Open the Device Manager.
ere are various ways to do this, but the easiest is from the Power User Menu:
• Press the WIN (Windows) key and the X key together.
• e Power User Menu appears.
• Select Device Manager from the menu.