EasyManua.ls Logo

koslow TE-3000-HD - Page 2

Default Icon
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
The Prospector Kit Contains:
INTRODUCTION
The Prospector, Thermoelectric Alloy Sorter (TEAS) uses a theory like that of a thermocouple,
involving the direct conversion of temperature differences into electricity. This principle is also
known as the Seebeck Effect. A thermocouple type circuit is formed when a heated metal
probe makes contact with an unheated test metal. The thermal connection of these two
junctions, one at an elevated temperature and the other at room temperature, generates a
small voltage. The voltage varies with the type of test metal and can be consistently correlated.
The energy produced is displayed numerically on the liquid crystal display as a TE-Reading.
This thermal electric property of metals and temperature can be used to characterize most
types of metal. Industrial quality control instruments use this as a method to identify metal
alloys. This process known as thermoelectric alloy sorting.
http://en.wikipedia.org/wiki/Thermoelectric effect. This widely-known and approved method
(ASTM E977), is used for metal classification and verification. This instrument is also cited in
the RB211-72-AG183 for aircraft use.
APPLICATIONS
Detects the presence of a coating or a plating on conductive surfaces.
Sort metal mix-ups: Stainless Steels, Aluminum, Specialty Steels, Tool Steels, Low Alloy
Steels, and Titanium
Reclaim scrap
Inspect incoming and outgoing stock.
Verify alloy before repair or welding.
Use on pipe, tanks, wire, parts of any size or shape.
Quantity
Item
Part Number
1
ThermoElectric Alloy Sorter
TE-3000-HD
1
Certificate of Initial Calibration
TE-3000-CI
1
Instruction Manual (stowed behind lid foam)
TE-3000-D
1
The Hot Probe (hard wired to sorter)
TE-3000--P
1
Hot Spherical Tip (installed)
TE-3000-TS
1
Replacement Hot Probe Tip Conical
TE-3000-TC
1
Replacement Hot Probe Tip Blunt
TE-3000-TB
1
Replacement Hot Probe Tip Spherical
TE-3000-TS
1
Hot Tip Installation Pliers
TE-3000-F
1
AC Power Cord (removable)
TE-3000-AC
1
Heavy Block with BNC Connections Cold Circuit
TE-3000-HB
1
6 foot BNC cable (for use with the Heavy Block)
TE-3000-BC
1
Wand with BNC Connections Cold Circuit
TE-3000-W
1
Alligator Clip with BNC Connections Cold Circuit
TE-3000-G
1
Abrasive sheet
TE-3000-A
1
Standard Metal Coupon on a chain (D.Q.S.)
TE-3000-S
1
Soft Padded Case with window
TE-3000-SC
1
Hard Carry Case with custom foam
TE-3000-CC