Kowa VX-10a - Changing Initial Settings

5. Handy features
Handy features
5
P5-3
5-3 Changing initial settings
This paragraph describes initialization of this equipment. This equipment will be more conveniently utilized by
changing initial settings.
Initial settings can be changed by changing over the switches from one position to the other.
List of switches at the back of panel
SW Description OFF ON
SW 1
Start-up mode when power is turned
ON
Non-
mydriatic
*
Mydriatic
SW 2 External video input Don't use Don't use
*
SW 3
Counting sound when the timer
operates
Sounding
*
No
sounding
SW 4 Monitor select button Enabled
*
Disabled
SW 5 Don't use Don't use Don't use
SW 6 Don't use Don't use Don't use
SW 7 Don't use Don't use Don't use
SW 8 Don't use Don't use Don't use
SW 9 Don't use Don't use Don't use
SW 10 Don't use Don't use Don't use
* Factory default settings
Position of switch
(bottom of the operation panel)