Kozyard Edward - Step 1: Pole Setup; Step 2: Sidewall Track Beams

Set up poles (Part A) with stand paletes (Part B) using
screws ① as shown in diagram.
Step 1:
Put 6 hooks（Part H) to each slot of
sidewall track (Part C&C1).
Then connect Part C and
Part C1 into one beam
using screws ④ as shown
in diagram.
Step 2：
Put 7 hooks（Part H) to each slot
of sidewall track (Part C2&C3).
Then connect Part C2 and Part C3
into one beam using screws ④
as shown in diagram.
6PCS
X4
X2
X2