Manual KR-737+ radio navigation system
20
EN
7.4.3 Entering ID3 tag
This unit supports ID3 tag version 2.0. For character codes, refer to the table below.
Fig. 13: ID3 tags
Entering file and folder names
Names using the code list characters are the only file names and folder names that can be
entered and displayed. Using any other character will cause the file and folder names to
be displayed incorrectly. The unit recognizes and plays only files with the MP3/ WMA
extension. Note: A file name entered with characters not on the code list may not play
correctly.
7.4.4 Electronic shock protection
• 10 seconds for CD-DA (CDA)
• >45 seconds for MP3 recorded at 44.1kHz,128kbps
• >90 seconds for WMA recorded at 44.1kHz,128kbps
7.4.5 Stop playback temporarily
• During playback, press to pause playback.
• The sound will be muted.
• Display "PAUSE" in the screen.
Press again to continue playback. To resume normal play, repeat the oper-
tion.
7.4.6 Stop playback entirely
During DVD, VCD, CD, MP3 playback:
• Press key on remote control to stop playback and the relevant location on the
disc will be saved, press to resume the playback from the saved disc loca-
tion.
• Press twice to cease the playback. Press to start the playback from the
very beginning the Title page of the DVD or the first track of VCD / CD.
7.4.7 Select desired track
• Press
or to skip to the next track
• Use 1-9 and 0, 10+ buttons on the remote control to select desired track num-
ber.
To Next Page
Loading...