Kramer VM-1120

Your Balanced Stereo Audio Distributor
5
Table 1: Front Panel VM-1120 1:10 Balanced Stereo Audio Distributor Features
# Feature Function
1 Power LED Illuminates when the unit is powered on
2 1:10 / 2x1:5 Button Push in to select 2x1:5
1
, release to select 1:10
2
3
LEFT
Level B and A Trimmers Adjusts
3
the output signal level for OUTPUTS A and B
4
1:10 / 2x1:5 Button
Push in to select 2x1:5
1
, release to select 1:10
2
5
RIGHT
Level B and A Trimmers Adjusts
3
the output signal level for OUTPUTS A and B
Table 2: Rear Panel VM-1120 1:10 Balanced Stereo Audio Distributor Features
# Feature Function
6 INPUT A XLR Female Connector Connects to the source A
7 INPUT B XLR Female Connector Connects to the source B
8 OUT A XLR Male Connector Connects to the acceptor A (from 1 to 5)
9 OUT B XLR Male Connector Connects to the acceptor B (from 1 to 5)
10 Power Connector with Fuse 230V AC, 50/60Hz, (115V AC, U.S.A.) power inlet
11 Power Switch Turns the unit ON and OFF
1 Splits inputs A and B to outputs 1A-5A and 1B-5B, respectively
2 Splits input A to all 10 outputs
3 Insert a screwdriver into the small hole and carefully rotate it, trimming the OUTPUT level