Kramer VM-2DH - Technical Specifications

Technical Specifications
9
9
6 Technical Specifications
Table 3 lists the technical specifications of the VM-2DH DisplayPort to
DVI/HDMI Converter.
Table 3: Technical Specifications
1
of the VM-2DH
INPUT: 1 DisplayPort connector
OUTPUTS: 1 DVI, 1.2Vpp on DVI Molex 24-pin female connector; DDC signal 5Vpp (TTL)
1 HDMI connector
STANDARDS COMPLIANCE: Supports DVI 1.1, HDCP and HDMI
MAX RESOLUTION: Up to WUXGA (1920x1200), 1080p
BANDWIDTH: 1.65Gbps
CONTROLS: EDID button for selecting and storing EDID information
POWER SOURCE: 5V DC 720mA
OPERATING TEMPERATURE:
0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F)
HUMIDITY: 10% to 90%, RHL non-condensing
DIMENSIONS: 12cm x 7.2cm x 2.4cm (4.7" x 2.8" x 1.0") W, D, H
WEIGHT: 0.3kg (0.67lbs) approx.
ACCESSORIES: Power supply, mounting bracket
OPTIONS: Kramer DVI cables
2
, RK-3T rack adapter
1 Specifications are subject to change without notice
2 The complete list of Kramer cables is available at
http://www.kramerelectronics.com