Overview
3
3 Overview
The high performance VP-200
XLN
is a 1:2 line amplifier / distribution
amplifier for XGA
1
computer graphics signals that accepts one input, provides
correct buffering and isolation, and then distributes the signal to two identical
outputs.
In particular, the VP-200
XLN
XGA Line Amplifier / DA includes:
High-density 15 pin D connectors
Video bandwidth of 400MHz, ensuring that it remains transparent for all
resolutions
Separate controls for output level and cable equalization; ID Bit control,
and independent DC or AC coupling for red, green and blue
Achieving the best performance means:
Connecting only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching, and elevated
noise levels (often associated with low quality cables)
Avoiding interference from neighboring electrical appliances and
positioning your VP-200
XLN
away from moisture, excessive sunlight and dust
1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector
having a resolution from VGA up to UXGA
To Next Page
Loading...
