Putting into operation
11.
Steplessly adjust operating pressure
with handwheel. The maximum pres-
sure is adjusted ex work.
Kränzle 1132: max. 130 bar
12.
Put HP cleaner into horizontal posi-
tion.
These machines must be operated
in horizontal position!
Deaeration of the appliance: Pull and
release the trigger several times.
Switch on high-pressure cleaner with
opened spray gun. Start cleaning
task.
10.
Connect to circuit.
Kränzle 1132:
230 V ~, 12.0 A, 50 Hz
The socket must be protected with a
16A delay action fuse on the mains
side.
9.
Connect water hose to water inlet.
The cleaner may be connected to a
water mains (1-8 bar pre-pressure)
with either cold or up to 60°C warm
water.
16
To Next Page
Loading...
Need help?
General
