17
When using cleansing agents
Suction of cleansing agents by means of the detergent injector is only possible if the
Vario Jet lance is fitted. The lance mus be set to low pressure.
Suction of detergents
1.
Please chemicals filter into container
with cleansing agent.
Observe specifications of detergent manufacturer!
e.g.: protective equipment, rules for waste water treatment etc.
Caution: dissolvents!
Never suck in liquids containing solvents like varnish
solvents, petrol, oil or similar liquid! Observe specifica-
tions of detergent manufacturers! Seals inside the appli-
ance are no resistant against solvents! The spray mist of
solvents is highly inflammable, explosive and poisonous.
3.
The chemicals supply is automatically
stopped when closing the Vario nozzle
by pushing it backwards.
Let cleansing agent take effect and
then spray off with a high-pressure jet.
2.
To reach the low pressure push Vario
nozzle to the front so that the injector
can suck in the cleansing agent.
To Next Page
Loading...
Need help?
General
