15
9.
Put HP cleaner into horizontal position.
These machines must be operated in
horizontal position! Unwind HP hose
from hose drum without kinks and nooses.
7.
Push on HP hose to gun.
8.
Screw together HP hose and gun.
10.
Connect water hose to water tank.
The cleaner may be connected to water
mains with cold or 60°C warm water.
Alternatively water can be sucked in from
a container (see page 17).
5.
Push on lance or Dirtkiller lance to gun.
6.
Screw together lance and gun.
Be careful when using hot water!
When running your high pressure cleaner with hot water
of 60° C raised temperatures occur. Do not touch the
metal parts of the cleaner without safety gloves!
To Next Page
Loading...
Need help?
General
